KTM Deltapascal ®
About product
Averaging pitot tube for process gas, steam and liquid metering
Applications
- waste and flue gas measurement
- natural gas measurement
- Superheated steam, high, medium and low pressure steam measurement
- Measurement of gaseous media including air, biogas, flue and sewer gases
- Heat carrier measurement
Your benefit
- Saving 5-15% on electricity bills when replacing constriction devices with a pito tube by reducing the pressure drop from 20-30% to 5-8%;
- Increasing the service life and lifetime of a steam turbine or pump by 20%, due to reduced inlet pressure;
- Reduction of expences by 4 times for the removal/installation of the flow meter, proving, transportation, replacement fund, and for repairing;
- Integrated computer in the explosion-proof casing, which is ready for volume calculations without additional equipment;
- Installation/dismounting without interruption of the process;
- Simulation proving method;
- Flow compensation by temperature and pressure;
- Metering on gas pipes of complex shape;
- Metering of high-temperature gases up to +710°C up to 25 MPa;
- Metering of air emissions from pipelines up to 15 m in diameter.
Technical details
| Measurement body material* | AISI 316L /03X17Н14М3 |
| Nominal pipe diameter, DN, mm | 100…2950 |
| Volumetric flow rate range: – for liquid, m3⁄h – for gas, m3⁄h – for steam, m3⁄h |
2,5…358000 5,5…4800000 2,5…6900000 |
| Volume and mass flow rate measurement error limit, % | ±0,5, ±0,7, ±1, ±1,5 |
| Operating pressure, MPa | 25 |
| Operating temperature, °С | -196…+710 |
| I/O ports | 4…20 mA, frequency, digital HART, Modbus RS-485, Ethernet, Foundation Fieldbus |
| Supply voltage DC, V | 10,5…45 |
| Ambient temperature, ºС | -40…+60 (standard) -70…+60 (on request) |
| Relative air humidity, not more than, % | 95 |
| Enclosure rate | IP66 |
| Verification interval | 4 years |
| Service life | 18 years |
